Ean-13 Beginning With 290 Addenda Required; Beginning With 378/379 Addenda Required; Beginning With 414/419 Addenda; Required - Honeywell N431X User Manual

Don't Require 2 Digit Addenda: If you have selected Require 2 Digit
Addenda, and you want to disable this feature, scan Don't Require 2
Digit Addenda. EAN-13 bar codes are transmitted, depending on the
setting you are using for
Default = Don't Require 2 Digit Addenda.
*
Don't Require
Addenda

EAN-13 Beginning with 290 Addenda Required

This setting programs
EAN-13 bar codes that begin with "290." The following settings can be
pro-grammed:
Require 5 Digit Addenda: All EAN-13 bar codes that begin with "290"
must have a 5 digit addendum. The EAN-13 bar code with the 5 digit
addendum is then transmitted as a single, concatenated bar code. If a 5
digit addendum is not found within the
13 bar code is discarded.
Note: if you are using
6-45), this setting will take precedence.
Don't Require 5 Digit Addenda: If you have selected Require 5 Digit
Addenda, and you want to disable this feature, scan Don't Require 5
Digit Addenda. EAN-13 bar codes are transmitted, depending on the
setting you are using for
Default = Don't Require 5 Digit Addenda.
*
Don't Require
Addenda
EAN-13 Beginning with 378/379 Addenda

Required

This setting programs the engine to require any combination of a 2 digit
addenda or a 5 digit addenda on EAN-13 bar codes that begin with a
"378" or "379." The following settings can be programmed:
6-46
EAN/JAN-13 Addenda
2 Digit
the engine to
EAN-13 Beginning with 2 Addenda Required
EAN/JAN-13 Addenda
5 Digit
Required.
Require
require a 5 digit addenda only on
Addenda Timeout
Required.
Require
2 Digit Addenda
period, the EAN-
(page
5 Digit Addenda