To Clear One Or All Prefixes Or Suffixes - Honeywell N431X User Manual

symbology to which you want to apply the prefix or suffix. For
example, for Code 128, Code ID is "j" and Hex ID is "6A".
Step 3. Scan the 2 hex digits from the
back cover of this manual or scan 9, 9 for all symbologies.
Step 4. Determine the hex value from the
page A-3, for the prefix or suffix you wish to enter.
Step 5. Scan the 2 digit hex value from the
back cover of this manual.
Step 6. Repeat Steps 4 and 5 for every prefix or suffix character.
Step 7. To add the Code I.D., scan 5, C, 8, 0.
To add AIM I.D., scan 5, C, 8, 1.
To add a backslash (\), scan 5, C, 5, C.
Note: To add a backslash (\) as in Step 7, you must scan 5C twice –
once to create the leading backslash and then to create the
backslash itself.
Step 8. Scan
Repeat Steps 1-6 to add a prefix or suffix for another symbology.
Example: Add a Suffix to a specific symbology
To send a CR (carriage return)Suffix for U.P.C. only:
Step 1. Scan Add
Step 2. Determine the 2 digit hex value from the Symbology
(included in the
for U.P.C.
Step 3. Scan 6, 3 from the
this manual.
Step 4. Determine the hex value from the
page A-3, for the CR (carriage return).
Step 5. Scan 0, D from the
this manual.
Step 6. Scan Save, or scan Discard to exit without saving.

To Clear One or All Prefixes or Suffixes

You can clear a single prefix or suffix, or clear all prefixes/suffixes for a
symbology. If you have been entering prefixes and suffixes for single sym-
bologies, you can use Clear One Prefix (Suffix) to delete a specific char-
acter from a symbology. When you Clear All Prefixes (Suffixes), all the
prefixes or suffixes for a symbology are deleted.
4 - 2
Save to exit and save, or scan Discard
Suffix.
Symbology Charts,
Programming Chart
Programming Chart
Programming Chart
ASCII Conversion Chart
Programming Chart
to exit without saving.
beginning on page A-1)
inside the back cover of
ASCII Conversion Chart
inside the back cover of
inside the
on
inside the
Chart
on