Table of Contents
Advertisement
the laser remains on after a good read, but the external trigger must be
pressed to scan the next bar code. Default = End Manual Activation After
Good Read.
Do Not End Manual Activation
After Good
* End Manual
Activation After
Good Read
Manual Activation Laser Timeout
- External Trigger Settings
You can set a timeout for the length of time the laser remains on and
attempting to decode bar codes when the external trigger is held down,
and after it is released. Set the length (in milliseconds) for a timeout by
scan-ning one of the following bar codes, then setting the timeout (from 1-
65535 milliseconds) by scanning digits from the
Programming
Chart, then
scan-ning Save. Default = External Trigger Hold 5000 ms, External
Trigger Release 0.
Laser Timeout - External
Trigger Hold
Laser Timeout -
External
Trigger Release
3 - 7
Advertisement
Table of Contents
