Hole Punch Erase; Original Size; Frame Erase Width - Canon IR1600 Copying Manual

IMPORTANT
Do not place originals with binding holes in the feeder, as it may damage the originals.
2
Press or
FRAME ERASE FEATURE

3.HOLE PUNCH ERASE

3
Press or

ORIGINAL SIZE

NOTE
You can set the Binding Hole Erase mode only on the original sizes shown on the display.
4
Press or
You can also use the numeric buttons to enter the binding hole erase width.

FRAME ERASE WIDTH

When you press
NOTE
You can set the width from 3 mm to 20 mm.
The default setting is 18 mm.
The machine selects the paper according to the original size you set in step 3 and the selected paper size is displayed.
to select <3.HOLE PUNCH ERASE>, and press
to select the size of the original, and press
to select the binding hole erase width, and press
, the standby display appears.
Erasing Shadows and Frame Lines from Copies (Frame Erase)
A3
18mm
.
.
.
2-13
2