Making Copies Erasing Binding Holes Etc. (Binding Erase) - Canon IR1600 Copying Manual

NOTE
You can set the book frame erase width in the range from 3 mm to 50 mm.
The default setting is 10 mm.
The machine selects the paper according to the original size you set in step 3 and the selected paper size is displayed.
5
Enter the desired copy quantity (1 to 99) using the numeric buttons.
For details about entering the copy quantity, see "Specifying the Required Number of Copies," on p. 1-7.
100%
TEXT
2
6
Press
Copying starts.
NOTE
To cancel all settings and return the machine to the Standard mode, press
If you press
CANCEL COPYING?
< YES
If you press
Set the frame erase width around the original using the <2.COPY SETTINGS> menu in the Additional Functions
menu. You can set from 1 mm to 20 mm. (See "Setting the Standard Frame Erase Width," on p. 3-7.)
Making Copies Erasing Binding Holes etc. (Binding
Erase)
1
Place your original, enter the Special Features menu, and open the <FRAME ERASE
FEATURE> menu.
For details about the procedure above, see steps 1 to 3 of "Making Copies Erasing the Frame of the
Originals (Original Frame Erase)," on p. 2-9.
FRAME ERASE FEATURE
1.DOC. FRAME ERASE
2-12 Erasing Shadows and Frame Lines from Copies (Frame Erase)
A3
(Start).
(Stop), the cancel job display appears. Select <YES> or <NO> using
(Stop) after copying has started, some sheets of blank paper may be output.
01
NO >
(Reset).
or .