Chapter 2 Useful Copy Functions - Canon IR1600 Copying Manual

If the message <INSERT CONTROL CARD> is displayed
Insert a control card. (See the Reference Guide.)
INSERT CONTROL CARD
2
Set the desired copy mode (paper size, image quality, exposure, copy ratio and
finishing).
NOTE
For details about these settings, see the pages from 1-8 in this chapter, or 'Chapter 2 Useful Copy Functions'.
3
Enter the copy quantity (1 to 99) using the numeric buttons.
NOTE
For instructions on setting the number of copies, see "Specifying the Required Number of Copies," on p. 1-7.
4
Press (Start).
Copying starts.
IMPORTANT
While copying, you cannot change copy mode settings, such as the copy quantity, paper size, and copy ratio.
Flow of Copy Operations
1
1-5