Canon IR1600 Copying Manual page 10

Staple copy: place the original with its top upward
Copies are stapled here.
1
IMPORTANT
The copies are stapled at the part equivalent to the upper left side of the original.
NOTE
A4, B5 and A5-size originals can be placed either vertically or horizontally. However, the scanning speed for
horizontally placed originals is somewhat slower than for vertically placed originals. You can place originals
horizontally when printing with Preset Zoom mode, such as when processing A4
Horizontally placed A4, B5 and A5-size originals are referred to as A4
A3 and B4-size originals must be placed horizontally.
For instructions on placing the original, see the Reference Guide.
If the message <ENTER DAC> is displayed
Enter the Department ID and Password. (See the Reference Guide.)
ENTER DAC
NOTE
When <AUTO SORT> is set to <ON>, the Collate or Offset Collate mode is automatically set when you place the
originals in the feeder. (See "Setting the Automatic Collate On/Off," on p. 3-8.)
1-4 Flow of Copy Operations
ABC
Original
(face up)
Vertical placement
[Feeder]
Copies are stapled here.
ABC
Horizontal placement
, B5
_
Original
(face up)
A3 .
and A5 .