Cover Violation - Agilent Technologies 1100 Series Reference Manual
Diode array and multiple wavelength detectors
Hide thumbs
Also See for 1100 Series:
- Reference manual (346 pages) ,
- Service manual (288 pages) ,
- User manual (214 pages)
Table of Contents
Advertisement
3
Troubleshooting and Test Functions
Cover Violation
The top foam has been removed.
The sensor on the detector main board detects when the top foam is in place.
If the foam is removed while the lamps are on (or if an attempt is made to
switch on the lamps with the foam removed), the lamps are switched off, and
the error message is generated.
• The top foam was removed during operation.
• Foam not activating the sensor.
66
Probable Causes
Suggested Actions
Replace the top foam.
Exchange the foam.
1100 Series DAD and MWD Reference Manual
Advertisement
Table of Contents
