Figure 3-3: Typical Fer785-Mm Diode Laser Source: Power On - Teledyne Princeton Instruments FER785-MM User Manual

Chapter 3
8. To turn on the FER785-MM Diode Laser Source, press the power button
located on the front of the housing ONE TIME.
The amber LASER ON LED illuminates indicating that the laser source is energized.
See

Figure 3-3: Typical FER785-MM Diode Laser Source: Power On

9. Laser output power can now be controlled using Teledyne Princeton Instruments
LightField software.
Operation
Figure 3-3.
NOTE:
The laser source always defaults to its nominal output
power rating following startup.
A
MBER
C ON
ONSTANT
13