Diode Laser Specifications; Power Specifications; Table A-3: Fer785-Mm Diode Laser Source Technical Specifications - Teledyne Princeton Instruments FER785-MM User Manual

Diode laser source
Table of Contents

Advertisement

18
A.3

Diode Laser Specifications

Refer to

Table A-3: FER785-MM Diode Laser Source Technical Specifications

Output Coupling
Wavelength
Wavelength Tolerance
Spectral Line Width
Side Mode Suppression Ratio
Output optical power
Beam divergence
N.A. and core diameter of coupling fiber
Output Power Stability
Peak wavelength drift
Operating Lifetime
Filter Size
A.4

Power Specifications

All voltages required by the FER785-MM Diode Laser Source are generated and
delivered by an external power supply included with each FER785-MM Diode Laser
Source using the supplied cables.
Power to the FER785-MM Diode Laser Source is switched on and off using the POWER
pushbutton on the front panel of the unit.
FER785-MM Diode Laser Source User Manual
Table A-3
for diode laser specifications.
Parameter
WARNING!
There are no user-serviceable parts within an FER785-MM
Diode Laser Source enclosure.
WARNING!
In case of a fire or other emergency, immediately remove
the power supply's AC plug from the wall receptacle.
Specification
FC/PC
785 nm
±0.5 nm
<0.15 nm
35 – 45 dB
475 mW maximum
8.0 Degrees
0.22 NA /105 micron
1% typical
±7 ppm
10,000 hours (typical)
0.5" [12.5 mm] diameter up to 0.2" [5 mm] thick
Issue 2

Advertisement

Table of Contents
loading

Table of Contents