Preparing For Use; Adjust The Supporting Legs; Connect To Ac Power Supply - Teledyne T3VNA Use & Care Manual

1.3 Preparing for Use

1.3.1 Adjust the Supporting Legs

Adjust the supporting legs properly to use them as stands to tilt the analyzer upwards for stable
placement as well as easier operation and observation of the instrument display.
Figure 1-3 before adjusting

1.3.2 Connect to AC Power Supply

The vector network analyzer accepts 100-240V, 50/60Hz or 100-120V 400Hz AC power supply. Please
use the provided power cord to connect the instrument to the power source as shown in the figure
below. Before powering on, make sure the analyzer is protected by a fuse.
Fuse holder
The Plug
4 T3VNA User Manual
Figure 1-4 after adjusting
Figure 1-5 Power Cord Connection