Figure 3-4: Typical Fer785-Mm Diode Laser Source: Gate Mode - Teledyne Princeton Instruments FER785-MM User Manual

14
10. Pressing the power button
switches the laser to GATE (or PULSE) mode.
The amber LASER ON LED remains on, and the blue GATE LED begins to flash. See
Figure

Figure 3-4: Typical FER785-MM Diode Laser Source: GATE Mode

11. Pressing the power button
Source OFF. All LEDs are extinguished.
FER785-MM Diode Laser Source User Manual
NOTE:
Laser radiation is emitted only when the incoming signal at
the PULSE input on the rear of the laser housing is HIGH.
See Figure 3-2.
3-4.
on the front of the housing a SECOND time
A
MBER
C
ONSTANT
B
LUE
F
LASHING
a THIRD time turns the FER785-MM Diode Laser
Issue 2
ON