Transferring Custom Picture Files - Canon XF100 Instruction Manual

Transferring Custom Picture Files

You can transfer custom picture files between the camcorder and SD card. When the custom picture file is in the
camcorder, use [Copy To b] or [Load From b] depending on the operation you wish to perform. Similarly,
when the custom picture file is on an SD card, use [Copy To Cam.] or [Load From Cam].
Copying a File from the Camcorder to an SD Card
1 After selecting a file in the camcorder, open the [Copy To b] submenu.
[H X Transfer File]
2 Select the file slot under which to save the file and then press SET.
• If there are available slots, you can select [New File] to save the file in
the first available slot.
3 Select [OK] and then press SET.
• The currently selected file will be copied to the selected slot on the
SD card, overwriting the file in that slot.
4 Press the MENU button to exit the menu.
Replacing a File in the Camcorder with a File on an SD Card
1 After selecting a file in the camcorder to replace, open the [Load
From b] submenu.
[H X Transfer File]
2 Select the file to transfer to the camcorder and then press SET.
3 Select [OK] and then press SET.
• The file in the camcorder will be overwritten by the one on the SD
card.
4 Press the MENU button to exit the menu.
Copying a File from an SD Card to the Camcorder
1 After selecting a file on the SD card, open the [Copy To Cam.]
submenu.
[H X Transfer File]
2 Select the file slot under which to save the file and then press SET.
3 Select [OK] and then press SET.
• The currently selected file will be copied to the selected slot on the
camcorder, overwriting the file in that slot.
4 Press the MENU button to exit the menu.
Replacing a File on an SD Card with a File in the Camcorder
1 After selecting a file on the SD card to replace, open the [Load From
Cam.] submenu.
[H X Transfer File]
2 Select the file to transfer to the SD card and then press SET.
3 Select [OK] and then press SET.
• The file on the SD card will be overwritten by the one on the
camcorder.
4 Press the MENU button to exit the menu.
[Copy To b]
[Load From b]
[Copy To Cam.]
[Load From Cam.]
Custom Picture Settings
[l Camera Setup]
[ Custom Picture]
[H X Transfer File]
[Copy To b]
[l Camera Setup]
[ Custom Picture]
[H X Transfer File]
[Load From b]
[l Camera Setup]
Custom Picture]
[
[H X Transfer File]
[Copy To Cam.]
[l Camera Setup]
Custom Picture]
[
[H X Transfer File]
[Load From Cam.]
101