Protecting Photos - Canon XF100 Instruction Manual

Photo Operations
Deleting All Photos
1 Open the [Delete All Photos] submenu.
[J Other Functions]
142
2 Select [OK] and then press SET.
• All of the photos on the SD card will be deleted.
• Select [Cancel] instead to cancel the operation.
• While the photos are being deleted, you can press SET to cancel.
3 When the confirmation message appears, press SET.
IMPORTANT
• Be careful when deleting photos. Deleted photos cannot be recovered.
NOTES
• Protected photos cannot be deleted.

Protecting Photos

You can protect photos to prevent accidental erasure. The custom picture file embedded in such a photo is also
protected. Photos can be protected from the photo playback screen or [Photos] index screen.
Operating modes:
Protecting a Photo from the Playback Screen
1 Display the photo to be protected.
• Refer to Viewing Photos (0 140).
2 Press SET to open the photo menu.
3 Select [Protect] and then press SET.
• To remove protection settings from a protected photo, select [Unprotect] instead.
• The screen prompts you to confirm the operation.
4 Select [OK] and then press SET.
• Select [Cancel] instead to cancel the operation.
• The selected photo is protected and h appears on the bottom left portion of the screen.
• If a custom picture file is embedded in the photo, it is also protected.
Protecting a Photo from the Index Screen
1 Open the [Photos] Index Screen
• Refer to Viewing Photos (0 140).
2 Move the orange selection frame to the photo to be protected.
3 Press SET to open the photo menu.
4 Select [Protect] and then press SET.
• To remove protection settings from a protected photo, select [Unprotect] instead.
• The screen prompts you to confirm the operation.
[Delete All Photos]
[J Other Functions]
[Delete All Photos]