External Connections; Video Output Configuration; Video Output Configuration By Terminal - Canon XF100 Instruction Manual

6
124

Video Output Configuration

The video signal output from the HD/SD SDI (b only), HDMI OUT and HD/SD COMPONENT OUT
terminals depends on the clip's video configuration, the capability of the external monitor (for video output from
the HDMI OUT terminal) and on various menu settings. Video output from the AV terminal will always be in 480/
60i standard.
Operating modes:

Video Output Configuration by Terminal

Refer to the following table for the video output configuration from each terminal. If necessary, you can
superimpose the onscreen displays on the video displayed on the external monitor (0 128).
Video Output Configuration by Terminal
Terminal
Recording frame
size / Frame rate
1080/60i
1080/30P
1080/24P
1080/slow or
fast motion
720/60P
720/30P
720/24P
720/slow or
fast motion
1
Set [N Video Setup]
2
When you set [M LCD/VF Setup]
In such case, output from the HD/SD SDI terminal (b only) and HD/SD COMPONENT OUT terminal will be in HD, regard-
less of their setting.
3
Video output will automatically switch to HD or SD, depending on the capability of the external monitor.
4
Set [N Video Setup]
5
When output from the HDMI OUT terminal is SD (480/60P), the output of the HD/SD SDI terminal will also be 480/60P.
NOTES
• b When the camcorder is connected via HDMI OUT terminal to an external monitor, the video signal
output from the HD/SD SDI terminal will be the same as that from the HDMI OUT terminal.
1, 2
HD/SD SDI
(b only)
HD SD
output output
5
1080/60i 480/60i
5
720/60P 480/60i
[SDI Output] to [HD], [SD] or [Off].
[HD Output] (under [Zebra]) to [On], you can display zebra patterns on an external monitor.
[Component Output] to [HD] or [SD].

External Connections

2, 3
HDMI OUT
HD SD
output output
1080/60i 480/60P
720/60P 480/60P
HD/SD COMPONENT
2, 4
OUT
HD SD
output output
1080/60i 480/60i
720/60P 480/60i
AV
SD
output
480/60i
480/60i