Transferring Custom Picture Files - Canon EOS C300 Instruction Manual

Custom Picture Settings

Transferring Custom Picture Files

You can transfer custom picture files between the camcorder and SD card. When the selected custom picture
file is in the camcorder, use [Copy To *] or [Load From *] depending on the operation you wish to perform.
Similarly, when the selected custom picture file is on an SD card, use [Copy To Cam.] or [Load From Cam].
116
Copying a File from the Camcorder to an SD Card
1 After selecting a file in the camcorder, open the [Copy To *] submenu.
[+ / Transfer File] > [Copy To *]
2 Select the file slot on the SD card under which to save the file and then
press SET.
• If there are available slots, you can select [New File] to save the file in the first available slot.
3 Select [OK] and then press SET.
• The currently selected file will be copied to the selected slot on the SD card, overwriting the file in that slot.
When the confirmation screen appears, press SET.
4 Press the CUSTOM PICTURE button to exit the custom picture menu.
Replacing a File in the Camcorder with a File on an SD Card
1 After selecting a file in the camcorder to replace, open the
[Load From *] submenu.
[+ / Transfer File] > [Load From *]
2 Select the file to transfer to the camcorder and then press SET.
3 Select [OK] and then press SET.
• The file in the camcorder will be overwritten by the one on the SD card. When the confirmation screen
appears, press SET.
4 Press the CUSTOM PICTURE button to exit the custom picture menu.
Copying a File from an SD Card to the Camcorder
1 After selecting a file on the SD card, open the [Copy To Cam.]
submenu.
[+ / Transfer File] > [Copy To Cam.]
2 Select the file slot under which to save the file and then press SET.
3 Select [OK] and then press SET.
• The currently selected file will be copied to the selected slot on the camcorder, overwriting the file in that
slot. When the confirmation screen appears, press SET.
4 Press the CUSTOM PICTURE button to exit the custom picture menu.
Replacing a File on an SD Card with a File in the Camcorder
1 After selecting a file on the SD card to replace, open the
[Load From Cam.] submenu.
[+ / Transfer File] > [Load From Cam.]
2 Select the file to transfer to the SD card and then press SET.
3 Select [OK] and then press SET.
• The file on the SD card will be overwritten by the one on the camcorder. When the confirmation screen
appears, press SET.
4 Press the CUSTOM PICTURE button to exit the custom picture menu.
[+ / Transfer File]
[Copy To *]
[+ / Transfer File]
[Load From *]
[+ / Transfer File]
[Copy To Cam.]
[+ / Transfer File]
[Load From Cam.]