Using Line Input Or An External Microphone Connected To An Xlr Terminal - Canon XF100 Instruction Manual

Recording Audio
Activating the Microphone Attenuator
If the audio level is too high and the sound sounds distorted when
recording with the built-in microphone or a microphone connected to the
78
MIC terminal, activate the microphone attenuator (12 dB for the built-in
microphone, 20 dB for an external microphone).
1 Open the [Int. Mic Att.] submenu.
[m Audio Setup]
2 Select [On] and then press SET.

Using Line Input or an External Microphone Connected to an XLR Terminal

Connecting an External Microphone to an XLR Terminal
Follow the procedure below to attach an external microphone to an XLR terminal (refer also to the following
illustration).
1 Loosen the microphone lock screw ( ), open the microphone holder unit and insert the microphone ( ).
2 Tighten the lock screw and put the microphone cable through the microphone cable clamp under the
microphone holder unit ( ).
3 Plug the microphone cable into the desired XLR terminal ( ).
Microphone lock screw
[Audio Input] [Int. Mic Att.]
Cable clamp
[m Audio Setup]
Audio Input]
[
Int. Mic Att.]
[
[Off]
XLR terminals