Table of Contents
Advertisement
Item number Item name
709
CAV LEVEL FORMAT
Sub-Item
1
OUTPUT CAV
LEVEL
710
INTERNAL VIDEO
SIGNAL GENERATOR
712
VIDEO PROCESS ON
CAP LOCK 2FIELD
Menu items in the 700s, relating to video control (Continued)
Settings
Select whether the analog component output should be D-1 or Betacam.
(Selectable only in 525 mode)
Format
Color bars
D-1 CAV
100/0/100/0
Betacam
100/7.5/77/7.5 714 mV
Select the analog component output format.
B-CAM : Betacam
D1: D-1
Select the test signal to be output from the VTR's internal test signal generator.
When the selection is other than "OFF" with no cassette inserted in the unit, the
internal test signal generator operates and outputs the selected test signal.
OFF : No test signal is generated. (The VTR operates normally.)
CB100: 100% color bar signal
CB75: 75% color bar signal
CB75R: 75% color bar signal (reverse)
BOW: Bowtie signal
PLSBR: Pulse & bar signal
MLTBS: Multi-burst signal
HSWP: H sweep signal
5STEP: 5-step signal
RAMP: Ramp signal
SH: Shallow ramp signal
RED: Red signal
GRAY: 50% flat signal
WHITE: 100% flat signal
BB: Black burst signal
SDI: SDI check field signal
NTC7: NTC 7 test signal (selectable only in 525 mode)
LN330: Line 330 test signal (selectable only in 625 mode)
When the CAPSTAN LOCK switch on the subsidiary control panel or menu item
106 is set to 2FLD for 2-field playback, select whether or not to carry out a
"picture shift".
OFF : No picture shift.
ON: Carry out picture shift.
Y video
V sync
700 mV
300 mV
286 mV
Chapter 5 Menu System
R–Y/B–Y
700 mV
700 mV
5-13
Advertisement
Table of Contents
