Table of Contents
Advertisement
2-2 Connector Panel
Cooling fan
AC IN
BREAKER
7 Power supply
1 AUDIO OUTPUT CH1 to CH4 connectors
(XLR 3-pin, male)
These output analog audio signals for channels 1 to 4.
2 TIME CODE OUT connector (XLR 3-pin, male)
During playback, this outputs the playback time code.
3 SDI (Serial Digital Interface) DIGITAL
OUTPUT connectors (BNC type)
These output D1 format digital video/audio signals.
4 REF. (reference) VIDEO INPUT connectors
(BNC type) and 75 Ω termination switch
Input a reference video signal. Input a video signal
with chroma burst (VBS) or a monochrome video
signal (VS). When using the loop-through connection
set the switch to the OFF position, and otherwise to the
ON position.
2-12
Chapter 2 Location and Function of Parts
1 AUDIO OUTPUT CH1 to CH4 connectors
2 TIME CODE OUT connector
3 SDI DIGITAL OUTPUT
connectors
AUDIO OUTPUT
CH1
CH2
CH3
CH4
R
4 REF.VIDEO INPUT connector and 75 Ω termination
switch
5 COMPOSITE VIDEO OUTPUT connectors
6 COMPONENT VIDEO OUTPUT connectors
Cooling fan
DIGITAL OUTPUT
SDI
1
2
TIME CODE
OUT
VIDEO INPUT
REF.VIDEO
75Ω
ON
MONITOR OUTPUT
L
OFF
REMOTE(9P)
RS-232C
8 External device connectors
9 MONITOR OUTPUT connectors
5 COMPOSITE VIDEO OUTPUT connectors
(BNC type)
These output analog composite video signals.
When the CHARACTER switch on the subsidiary
control panel is set to ON, the output from connector 3
(SUPER) has superimposed text information such as
time code, menu settings, and alarm messages.
6 COMPONENT VIDEO OUTPUT connectors
(BNC type)
These output analog component video signals (Y/R–Y/
B–Y).
VIDEO OUTPUT
COMPOSITE
COMPONENT
(OPTION)
1
Y
2
R-Y
3
(SUPER)
B-Y
VIDEO CONTROL
Advertisement
Table of Contents
