Sony DNW-30P Operation Manual page 16

2-1 Control Panels
You can carry out noiseless playback in the range of
±1 times normal speed from a Betacam SX format
tape.
Playback modes using the search dial
Playback mode Operations and functions
Shuttle Press the SHUTTLE button or the search
dial so that the SHUTTLE button lights,
then turn the search dial. Playback is
carried out at a speed determined by the
position of the search dial. The playback
speed range is as follows:
• Using a Betacam SX tape: –50 to +50
times normal speed
• Using an analog Betacam tape: –35 to
+35 times normal speed for DNW-A30
or –42 to +42 times normal speed for
DNW-A30P
The search dial has detents at the still
position and at ±10 times normal speed.
Jog Press the JOG button or the search dial
so that the JOG button lights, then turn
the search dial. Playback is carried out
at a speed determined by the speed of
rotation of the search dial. The playback
speed range is –1 to +1 time normal
speed:
The search dial has no detents.
Variable Press the VAR button, turning it on, then
turn the search dial. You can control the
playback speed finely (47 steps) in the
range of ±1 times normal speed.
The search dial has detents at the still
position and at ±1 times normal speed.
Capstan Hold down the PLAY button and turn the
override search dial to adjust the playback speed
in the range of ±15%. Use this for phase
adjustment between this unit and an
external connected device.
Changing the setting of extended menu item 101
enables you to use the search dial alone to select
shuttle/jog/variable modes, without using the
SHUTTLE, JOG, and VAR buttons.
2-8
Chapter 2 Location and Function of Parts