Table of Contents
Advertisement
Item number Item name
118
KEY INHIBIT SWITCH
EFFECTIVE AREA
Sub-item
1
REMOTE
SELECT
2
MONITOR
SELECT
3
CONTROL
PANEL
119
VARIABLE SPEED LIMIT
IN KEY PANEL CONTROL
120
CTL LOCK IN VAR/SHTL
123
TAPE INDEX SELECT
Item number Item name
201
PARA RUN
Menu items in the 100s, relating to the control panels (continued)
Settings
Select which switches and buttons can be operated when the KEY INHIBIT
switch on the subsidiary control panel is set to ON. The following sub-items
control different sets of switches and buttons independently.
Select whether the REMOTE/LOCAL switch in the upper control panel is enabled.
DIS : Disabled.
ENA: Enabled.
Select whether the AUDIO MONITOR SELECT buttons in the upper control panel
are enabled.
DIS : Disabled.
ENA: Enabled.
Select which switch and button operations can be carried out from the control
panel of this unit or an external control panel connected to this unit.
DIS : All switches and buttons are disabled.
EDIT: All switches and buttons for editing operations are disabled.
ENA: All switches and buttons are enabled.
Select the playback speed range when carrying out playback in variable mode
from the control panel of this unit.
OFF : –1 to +1 times normal speed.
ON: 0 to +1 times normal speed.
Select whether the tape transport should be phase-locked to the CTL signal
during playback in variable or shuttle mode.
OFF : Not phase-locked.
ON: Phase-locked at the following speeds: –1, –0.5, 0.5, and 1.0 times normal.
Select the "UB marks" to which INDEX functions apply.
REC: Select REC START MARK.
SHOT1: Select SHOT MARK 1.
SHOT2: Select SHOT MARK 2.
ALL: Select REC START MARK, SHOT MARK 1, and SHOT MARK 2.
When the tape is cued up to a UB mark, the type of UB mark (REC,SHOT 1, or
SHOT 2) is displayed in the time data display area.
The UB marks are recorded by a Betacam SX camcorder. For more information
about the UB marks, refer to the camcorder operation manual.
Menu items in the 200s, relating to the remote control interface
Settings
Select whether or not to use synchronized operation for two or more VTRs.
DIS : No synchronized operation.
ENA : Use synchronized operation.
5-9
Chapter 5 Menu System
Advertisement
Table of Contents
