Subsidiary Control Panel - Sony DNW-30P Operation Manual

2-1-3 Subsidiary Control Panel

Pull out the lower control panel to reveal the
subsidiary control panel.
1 EMPHASIS switch (DNW-A30/A30P only)
2 CHARACTER switch
3 DOLBY NR switch (DNW-A30/A30P only)
EMPHASIS CHARACTER DOLBY
NR
ON OFF OFF ON OFF ON
(DNW-A30)
1 EMPHASIS switch (DNW-A30/A30P only)
Set this to ON to apply emphasis to the analog
playback audio signal to convert the analog audio
signal to a digital audio signal.
2 CHARACTER switch
Select whether or not to superimpose text information
such as time code, menu settings, and alarm messages
on the video signal output from the COMPOSITE
VIDEO OUTPUT 3 (SUPER) connector.
ON: Superimposed text.
OFF: No superimposed text.
The factory default setting is ON.
3 DOLBY NR (noise reduction) switch (DNW-
A30/A30P only)
When using an oxide tape, switch the Dolby noise-
reduction system for analog audio on or off.
When using metal tape, the Dolby noise-reduction
system is automatically switched on, regardless of the
setting of this switch.
ON: Enable the Dolby noise-reduction system for
playback of an analog Betacam oxide tape.
4 PROCESS
CONTROL switch
VIDEO CHROMA SET UP
PROCESS
PRESET PRESET PRESET
CONTROL
REMOTE LOCAL
MANUAL MANUAL MANUAL
MENU
7 SET UP (DNW-A30/30)/BLACK LEVEL (DNW-A30P/30P) knob
6 CHROMA knob and PRESET/MANUAL switch
5 VIDEO knob and PRESET/MANUAL switch
!£ CAPSTAN LOCK switch
!™ KEY INHIBIT switch
!¡ SC knob
0 SYNC knob
Y/C DELAY CHROMA PHASE SYNC SC
PRESET PRESET
MANUAL MANUAL
SYSTEM PHASE
9 CHROMA PHASE knob and PRESET/MANUAL
switch
8 Y/C DELAY knob and PRESET/MANUAL switch
and PRESET/MANUAL switch
OFF: Disable the Dolby noise-reduction system for
playback of an analog Betacam oxide tape.
The factory default setting is OFF.
4 PROCESS CONTROL switch
This selects the method of control of the internal
digital video processor.
REMOTE: Select this position to use an optional
BVR-50/50P Remote Control Unit for remote
control of the internal digital video processor.
MENU: Select this position to use setup menus to
change the settings for the internal digital video
processor.
LOCAL: Select this position to use the subsidiary
control panel to change the settings for the internal
digital video processor.
Chapter 2 Location and Function of Parts
KEY CAPSTAN
INHIBIT LOCK
ON OFF 2FD 8FD
4FD (625/50)
2-9