Table of Contents
Advertisement
7 Power supply
BREAKER button
AC IN
BREAKER
Ground terminal
AC IN connector
Use the supplied power cord to connect this to an AC
outlet.
BREAKER button
This jumps out if an excess current flows on the
primary side of the AC power circuit.
Ground terminal
Connect this to ground.
8 External device connectors
REMOTE (9P) connector
AC IN connector
REMOTE(9P)
REMOTE(9P) connector (D-subminiature 9-pin)
For editing with another DNW-A100/A100P/A50/
A50P/A45/A45P unit, or with another D-1, D-2, or
Betacam VTR controlled by a BVE-series editor such
as a BVE-900/910/2000/9000/9000P/9100/9100P, use
the supplied 9-pin connector remote control cable for
connection to the other device.
RS-232C connector (D-subminiature 25-pin)
Use this for monitoring and diagnosis of the state of
this unit from an external computer, using ISR
(Interactive Status Reporting).
VIDEO CONTROL connector (D-subminiature 15-
pin)
For remote control of the internal digital video
processor, connect an optional BVR-50/50P Remote
Control Unit or similar.
Always power off this unit before connecting the
remote control unit.
9 MONITOR OUTPUT connectors (XLR 3-pin,
male)
According to the setting of the AUDIO MONITOR
SELECT buttons on the upper control panel, two (L
and R) audio monitor signals are output.
RS-232C connector
VIDEO CONTROL connector
RS-232C
VIDEO CONTROL
Chapter 2 Location and Function of Parts
2-13
Advertisement
Table of Contents
