Table of Contents
Advertisement
INSTALLATION
CONTEMPORARY FACEPLATE INSTALLATION PART 3
434-033
434-514
434-032
434-018F
434-516
434-516BL
434-516R
434-517
1) Install the control shield with 2 #8 - 1/2" Phillips screws to the bottom
of the fl ush door as shown in Diagram 1.
2) Install the heat defl ector on the fi re box as shown in Diagrams 2 &
3.
Loosen 3 Phillips head screws already in fi rebox, slide heat defl ector
on to screws and retighten.
Top of Unit
Heat Defl ector
Faceplate Support
Mounting Frame
44
Faceplate
Mounting Plate
Faceplate Support
Control Shield
Heat Defl ector
Faceplate - Black
Faceplate - Blue
Faceplate - Red
Faceplate - Stainless Steel
Diagram 1
Heat Defl ector
Diagram 2
Control Shield
Diagram 3
3) Loosen 4 phillips head screws located inside fi rebox, for screw locations
see Diagram 4. Install mounting frame and retighten screws.
4) After the frame has been installed, locate the 2 phillips head screws
on lower part of the mounting frame- see Diagram 3 for location.
Slide on the 2 faceplate supports and retighten the screws.
Important: Positon of bracket must be as shown in Diagram 5, with
bend away from fi replace.
Diagram 5
5) The top of the faceplate has a fl ange that hooks over the top of the
fl ush door.
Diagram 6
Flange
®
Regency
P33-5 Zero Clearance Direct Vent Gas Fireplace
Diagram 4
Bend
Advertisement
Table of Contents
