Stand Mode Indication - Wasp WWS650 Product Reference Manual

Enter/Exit Programming Mode Scanning Features

Stand Mode Indication

This operation is useful for indicating when the reader is in Stand Mode. If enabled, the blue
indicator will blink when Stand Mode scanning is active. If the reader is removed from its Stand
support or from the Base Station (cordless models) and switches out of Stand Mode into Trig-
gered Mode, blinking will stop until Stand Mode is active again.
$CSMFL00(CR)
DEFAULT
Stand Mode Indication = Disable
$CSMFL01(CR)
Stand Mode Indication = Enable
74 Wasp WWS650