Factory Default & Keyboard Connection; Autosense Stand Mode - Wasp WLR8900 Programming Manual

Chapter 5
Factory Default & Keyboard Connection
Factory Default
Use the Factory Default bar code to reset the scanner to the Default settings.
Factory Default

Autosense Stand Mode

Scan this Autosense Stand Mode bar code to enable the hands-free autosense
feature of the WLR 8900/8905 Scanners. If you desire to turn this mode "off,"
please scan the default bar code above.
Autosense Flash Mode
Enable
Keyboard Connection
The Keyboard Connection is used to program the Wasp WLR 8900/8905
Scanners for the type of computer it is attached.
PC - AT (PS/2) *
PC - XT
Notebook
*Default
6