Feeder - Canon ImageCLASS 2300 Copying Manual

Feeder

Place a stack of originals in the feeder, and press [Start]. The machine
automatically scans them.
You can place the following originals in the original supply tray:
Item
Weight
Size
Tray Capacity
IMPORTANT
Do not place the following types of originals in the feeder:
- Originals with tears or large binding holes
- Severely curled originals or originals with sharp folds
- Clipped or stapled originals
- Carbon backed paper or other originals that might not feed smoothly
- Transparencies and other highly transparent originals
Avoid scanning the same original using the feeder more than approximately 30 times.
Scanning the same original repeatedly may result in the original becoming folded or torn,
which in turn could cause a paper jam.
If the feeder rollers are dirty from scanning an original written in pencil, perform the
feeder cleaning procedure. (See Chapter 6, "Routine Maintenance," in the Reference
Guide.)
10 to 32 lb bond (37 to 128 g/m
Place very thin originals: 10 to 14 lb bond (37 to 51 g/m
originals: 28 to 32 lb bond (105 to 128 g/m
11" x 17" , LGL , LTR
50 sheets (LTR or smaller)
25 sheets (LGL or larger)
Specifications
2
)
2
) into the feeder one at a time.
, LTR , or STMT .
Placing Originals
2
), or very thick
1-13
1