IMPORTANT
Do not add or remove originals while they are being scanned.
Do not place objects in the original output area. Blocking the paper delivery slot
may damage the originals.
When scanning is complete, remove the originals from the original output tray to
avoid paper jams.
NOTE
The scanned originals are output face down to the original output tray.
You can place different size originals (i.e., LTR
LTR ) together in one group in the feeder when you set the Different Size
Originals mode. (See "Different Size Originals," on p. 3-22.)
Original Output Tray
and 11" x 17" , STMT
Placing Originals
1
and
1-15