Different Size Originals - Canon ImageCLASS 2300 Copying Manual

Different Size Originals

This mode enables you to copy different size originals together in one group, as
long as they have one side with an equal length (i.e., LTR
make sure that the sides of the originals with the same length be lined up when you
place them in the feeder and the machine will automatically select the appropriate
paper size and copy ratio for each original.
3
In order to use the Different Size Originals mode, you need to assign this function to
a Shortcut key in the Additional Functions menu before making copies. (See "Using
Shortcut Keys," on p. 4-16.)
IMPORTANT
If the machine is operating in the Different Size Originals mode, you cannot use the
Two-Page Separation, Frame Erase, or Image Combination modes.
All originals placed together in the feeder must be the same weight (paper type).
NOTE
You can use the stack bypass for the Automatic Paper Selection when:
- The paper is loaded in the stack bypass
- The paper size has been specified in 06 USE STACK BYPASS in COMMON
- Automatic Paper Selection is set to '02 ON' for the stack bypass in the DRAWER
1
COPY
Reduce Enlarge
2
1 2
Two Page Separation Frame Erase
4
3
3-22

Different Size Originals

SETTINGS from the Additional Functions menu
ELIGIBLTY menu
Press [COPY].
lights, and the Copy Basic Features screen appears.
COPY
Place your originals in the feeder © press the Shortcut key
([1] to [4]) where you registered the Different Size Originals
mode.
The screen displays [DIF SIZE DOC] on the upper left corner.
and 11" x 17" ). Just