Canon ImageCLASS 2300 Copying Manual page 38

F3 3
Press [F3] (M) or [F4] (L) to select the desired paper size.
F4
Each time you press
becomes highlighted.
NOTE
The paper sizes shown on the LCD display vary depending on which paper sizes
are loaded in the paper drawers.
indicates that the paper is set vertically, and
horizontally.
To select the stack bypass for the current job or for a reserved job, press
(STACK BYPASS).
G If you want to use the stack bypass:
❑
Load the desired paper size and type in the stack bypass.
The Paper Size setting menu appears.
The display above appears only if the paper size is set to '01 OFF' in the 06
USE STACK BYPASS menu. (See Chapter 3, "Selecting and Storing Settings,"
in the Reference Guide.)
❑
Press [F2] (SELECT PAPER).
F2
The Paper Type setting menu appears.
F3 F4
(M) or (L), the next or previous menu option
indicates that the paper is set
Paper Selection
2
F2
2-7