Changing The Current Standard Settings; Image Quality And Copy Exposure - Canon ImageCLASS 2300 Copying Manual

Changing the Current Standard Settings

The standard settings refer to a combination of copy modes that the machine
automatically applies at power ON or when [Reset] is pressed. This section
explains the procedure for changing copy modes stored as standard settings.
NOTE
The standard settings are applied when:
- (Copy) is pressed to initiate the copy function
COPY
- (Stop) or
- Auto Clear is initiated
- the operation from the Additional Functions menu is complete
There are seven standard settings:

- Image Quality and Copy Exposure

- Zoom Ratio
- Copy Quantity
- Frame Erase Width
- Auto Sort
- Sort Rotate
- Sharpness

Image Quality and Copy Exposure

This setting enables you to set the standard copy image quality and exposure.
NOTE
The default settings are 'TEXT' for Image Quality and '5' (center) for the Copy Exposure.
1
Additional Functions
Press [Additional Functions].
The ADDITIONAL FUNCTIONS menu appears.
(Reset) is pressed (except during copying)

Changing the Current Standard Settings

4
4-3