Nikon ECLIPSE Ti2-U Instruction Manual page 145

Device Description
Condenser NAMC module
module
NAMC LWD module
for NAMC
microscopy
Motorized
Motorized shutter
shutter
Controller for motorized shutter
Motorized shutter cable long
Motorized shutter cable long
Motorized shutter adapter for
dia-illumination
Motorized shutter adapter for
inverted epi-fl
Epi-fluorescence Fixed main branch
attachment
Main branch
Sub branch
Switching mirror
Stage-up lens
EPI-FL module
Light source for Fluorescence LED illumination
episcopic system
illumination
Episcopic field Circular field stop slider
diaphragm
Square field stop slider
slider
Rectangle field stop slider
Stage-up Stage-up kit for Ti2-A/U
Port Back port unit
Side port adapter
C mount adapter with centering tool
Model Remarks
TC-C-MN series For NAMC condensers
TC-C-MNL series For LWD condensers
NI-SH-E Diascopic illumination
Mountable only when a precentered
lamphouse is used.
Mounted by Nikon personnel.
NI-SH-CON
S-TI2-SHCLL For connecting the motorized shutter
controller
NI-SHCL For connecting the motorized shutter
controller
NI-SHADI
TI-SHAEP-I
TI2-LA-BF A branch used for connecting the
EPI-FL module to the microscope
TI2-LA-BM A branch used for connecting the
EPI-FL module to the microscope
TI2-LA-BS In combination with the TI2-LA-BM
main branch, two EPI-FL modules
can be attached.
TI-LA-SWM For switching the optical path of the
TI2-LA-BM main branch
Select either 50:50 or 100:0 (total
reflection).
For the lower-tier main branch when
TI-LA-SUL
a stage-up kit is used
For details, contact your local Nikon
representative.
TI2-LA-FL-2 Required for a combination of each
branch and an LED light source
D-LEDI Fluorescence LED light source
TI2-F-FSC
TI2-F-FSS
TI2-F-FSR Aspect ratio:
TI2-LA-SU For details, contact your local Nikon
representative.
TI-BPU Port for the second camera device
Supplied with the microscope main
body (x 2)
TI2-P-CCA
125
Chapter 7 Assembly of the Devices
2:3