Servicing The Carbon Canister; Servicing The Engine Oil - Toro Pro Force Debris Operator's Manual

5. Secure the cover to the housing with the latches
(Figure 17).
Servicing the Carbon
Canister
Replacing the Carbon Canister Air
Filter
Service Interval: Every 200 hours
1. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
2. Remove and discard the carbon canister air
filter (Figure 18).
1. Carbon canister
3. Install the new air filter.
Replacing the Carbon Canister
Purge-line Filter
Service Interval: Every 200 hours
Note:
Check the purge-line filter occasionally for dirt.
If the filter appears to be dirty, replace it.
1. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
2. Move the spring-type hose clamps on both sides
of the carbon canister purge-line filter away from
the filter (Figure
Figure 18
2. Carbon canister air filter
19).
1. Carbon-canister
purge-line filter
3. Remove and discard the carbon filter
19).
4. Install a new filter into the hose with the arrow
on the filter pointing toward the check valve and
secure it with the hose clamps

Servicing the Engine Oil

Note:
Change the oil more frequently when the
operating conditions are extremely dusty or sandy.
Oil Type: Detergent oil (API service SG, SH, SJ or
higher)
g029820
Crankcase Capacity: w/filter, 2 L (67 oz)
Viscosity: See the table below.
22
Figure 19
2. Check valve
(Figure
(Figure
Figure 20
g018506
19).
g000238