Using the Chute Position
Indicator
When the green indicator tab is visible in the rotation
gauge window, the chute is positioned on the left side.
When the red indicator tab is visible in the window, the
chute is positioned on the right side
The decal on the rotation gauge indicates the position
of the chute relative to the ground.
When an indicator tab is in the same colored region
on the decal, that indicates that the chute opening is
positioned more parallel to the ground.
When an indicator tab is in the different colored region
on the decal, that indicates that the chute opening is
positioned more toward the ground.
Figure 16
Left side shown, some parts hidden for clarity.
1. Red indicator tab
2. Rotation gauge and decal
Operating Tips
•
Practice operating the blower. Blow the same
direction the wind is blowing to prevent material
from blowing back into the cleared area.
•
Run the engine at full throttle when operating.
•
Adjust the blower nozzle opening so it blows under
the debris.
•
Use caution when blowing around newly planted
sod as the force of the air could disrupt the grass.
(Figure
16).
g314786
3. Green indicator tab (in
gauge window when the
chute is toward the left
side)
Important:
Raise the blower nozzle before
transporting the blower. If you leave the blower
nozzle in the down position during transport, it
may contact the ground and become damaged.
17