Table of Contents
Advertisement
Maintenance
Note: Determine the left and right sides of the machine
from the normal operating position.
Greasing the Blower
The debris blower must be lubricated after every 8 hours of
operation with a no. 2 lithium-based grease. The fittings
and locations are as follows:
Front fan mount pivots (2) (Fig. 16)
Rear fan mount pivots (2) (Fig. 17)
Fan bearing (2) (Fig. 18)
Figure 16
Figure 17
Servicing the Air Cleaner
Foam Element: Clean and oil after every 25 operating
hours, or yearly, whichever occurs first.
Note: Remove excess oil or damage to paper element may
occur.
Paper Element: Replace after every 100 operating hours
or yearly, whichever occurs first.
Note: Service the air cleaner more frequently (every few
hours) if operating conditions are extremely dusty or sandy.
Removing the Foam and Paper Elements
1. Stop the engine and remove the key.
2. Clean around the air cleaner to prevent dirt from getting
into the engine and causing damage (Fig. 19).
15
Figure 18
Advertisement
Table of Contents
