Crestron TSS-770 Product Manual page 37

Click the + (plus) icon next to Time/Date to display the following time and date settings.
Settings Tab - System Setup (Time/Date)
Time Synchronization
Time Synchronization: Turn on the toggle to use time synchronization via SNTP (Simple
l
Network Time Protocol).
Synchronize Now: With Time Synchronization turned on, click Synchronize Now to
l
synchronize the touch screen with the SNTP server(s) entered in the NTP Time Servers
table.
NTP Time Servers: With Time Synchronization turned on, use the provided table to enter
l
information regarding the SNTP server(s) used to synchronize the date and time for the
touch screen.
Click Add to add a new SNTP server entry into the table.
o
Enter the following information for each entry:
o
Enter the SNTP server address into the Address text field.
n
Enter the SNTP server port into the Port text field.
n
Use the Authentication Method drop-down menu to select the authentication
n
method used to access the SNTP server (if one exists).
If an authentication method is selected, enter the key used to authenticate
n
against the SNTP server into the Authentication Key text field.
If an authentication method is selected, enter the ID for the key used to
n
authenticate against the SNTP server into the Key ID text field.
To remove an entry, fill the checkbox to the left of the table entry, and then click
o
Delete.
Product Manual — Doc. 8745C TSS-770 and TSS-1070 • 33