Installing The Lower Triple Clamp - KTM 350 EXC-F 2022 Owner's Manual

12 SERVICE WORK ON THE CHASSIS
12.10
64
V01785-10
V01757-10

Installing the lower triple clamp

B01605-10
Main work
–
Pull the fuel tank breather hose out of the steering head screw.
–
Open the cable holder in front of the left radiator and detach
the wiring harness.
–
1
Loosen screw .
–
2
Remove screw .
–
Take off the upper triple clamp with the handlebar and set it
aside.
Info
Cover the components to protect them against damage.
Do not kink the cables and lines.
–
3
Remove O-ring and protective ring
–
Take off the lower triple clamp with the steering stem.
–
Remove the upper steering head bearing.
Main work
–
Clean the bearing and sealing elements, check for damage,
and grease.
High viscosity grease (
–
Insert the lower triple clamp with the steering stem. Mount
upper steering head bearing.
–
Check whether upper steering head seal
tioned.
–
2
Slide on protective ring
4
.
p. 149)
1
is correctly posi-
3
and O-ring .