Checking The Rubber Grip; Adjusting The Basic Position Of The Clutch Lever - KTM 350 EXC-F 2022 Owner's Manual

12 SERVICE WORK ON THE CHASSIS
12.40
12.41
86

Checking the rubber grip

401197-01
V00461-10

Adjusting the basic position of the clutch lever

E00842-10
–
Check the rubber grips on the handlebar for damage, wear,
and looseness.
Info
The rubber grips are vulcanized onto a sleeve on the
left and onto the handle tube of the throttle grip on the
right. The left sleeve is clamped onto the handlebar.
The rubber grip can only be replaced with the sleeve or
the throttle tube.
» If a rubber grip is damaged, worn, or loose:
–
Change the rubber grip.
–
1
Check that screw is firmly seated.
Guideline
Screw, fixed M4
grip
A
Diamond must be located at the top.
–
Adjust the basic position of the clutch lever to your hand size
by turning adjusting screw
Info
Turn the adjusting screw clockwise to increase the
distance between the clutch lever and the handlebar.
Turn the adjusting screw counterclockwise to decrease
the distance between the clutch lever and the handle-
bar.
The range of adjustment is limited.
Turn the adjusting screw by hand only, and do not
apply any force.
Do not make any adjustments while riding.
5 Nm (3.7 lbf ft)
Loctite ®
1
.
243™