Checking For Chain Dirt Accumulation - KTM 350 EXC-F 2022 Owner's Manual

12.32

Checking for chain dirt accumulation

–
Attach the fuel tank breather hose.
–
Mount and tighten screw
Guideline
Remaining screws,
chassis
V01766-11
–
Position the horn with the horn bracket.
–
Mount and tighten screws
Guideline
Remaining screws,
chassis
V01764-11
–
Plug in connector
–
Remove the wash cap set.
–
Clean the quick release coupling thoroughly with compressed
air.
Info
Under no circumstances should dirt enter into the fuel
line. Dirt in the fuel line clogs the injection valve!
V01824-11
–
Spray silicone spray onto a lint-free cleaning cloth and lightly
lubricate the O-ring of the quick-release coupling.
Silicone spray (
–
Join quick release coupling
Info
Route the cable and fuel line at a safe distance from
the exhaust system.
Finishing work
–
Mount the seat. (
–
Check the chain for coarse dirt accumulation.
» If the chain is very dirty:
–
Clean the chain. (
400678-01
SERVICE WORK ON THE CHASSIS 12
1
with the rubber bushing.
M6 10 Nm (7.4 lbf ft)
2
.
M6 10 Nm (7.4 lbf ft)
3
for the fuel pump.
p. 150)
4
.
p. 70)
p. 80)
79