Changing The Fuses Of Individual Electrical Power Consumers - KTM 350 EXC-F 2022 Owner's Manual

15 ELECTRICAL SYSTEM
15.5
112
V01781-10

Changing the fuses of individual electrical power consumers

Info
The fuse box containing the fuses of individual electrical power consumers is located under the seat.
V01801-10
–
2
Take off protection caps
–
Remove faulty main fuse
Info
A faulty fuse has a burned-out fuse wire
4
A spare fuse is located in the starter relay.
–
Insert a new main fuse.
Fuse (58011109120) (
–
Check that the electrical system is functioning properly.
Tip
Insert a spare fuse so that it is available if needed.
–
Mount the protection caps.
–
Mount the starter relay onto the holder and route the cable.
Finishing work
–
Mount the seat. ( p. 70)
Preparatory work
–
Remove the seat. ( p. 69)
Main work
–
1
Open fuse box cover .
–
Remove the faulty fuse.
Guideline
Fuse 1 – 10 A – EFI control unit, lambda sensor, combina-
tion instrument, electronic fuel injection, diagnostics con-
nector, fuel vapor retention system, fuse 4
Fuse 2 ‑ 10 A ‑ high beam, low beam, position light, tail
light, license plate lamp
Fuse 3 - 10 A - radiator fan, horn, brake light, turn signal
Fuse 4 - 5 A - fuel pump
Fuses res - 10 A - spare fuse
Info
A faulty fuse has a burned-out fuse wire
.
3
.
A
.
p. 143)
A
.