Factory Default Transparent Mode Network Configuration - Fortinet FortiGate FortiGate-100A Install Manual

Factory defaults

Factory default Transparent mode network configuration

FortiGate-60 series and FortiGate-100A FortiOS 3.0 MR4 Install Guide
01-30004-0266-20070831
Table 3: Factory default NAT/Route mode network configuration (Continued)
Modem interface
ADSL Modem interface
WLAN
Network Settings
In Transparent mode, the FortiGate unit has the default network configuration
listed in Table 4.
Table 4: Factory default Transparent mode network configuration
Administrator User name:
account
Password:
IP:
Management IP
Netmask:
Primary DNS Server:
DNS
Secondary DNS Server:
Internal
DMZ
DMZ1
Administrative access
DMZ2
WAN1
WAN2
WLAN
Factory default Transparent mode network configuration
IP:
Netmask:
Administrative Access:
IP:
Netmask:
Administrative Access:
IP:
Netmask:
Administrative Access:
Default Gateway (for default route)
Interface connected to external
network (for default route)
Default Route
A default route consists of a default gateway and the
name of the interface connected to the external network
(usually the Internet). The default gateway directs all non-
local traffic to this interface and to the external network.
Primary DNS Server
Secondary DNS Server
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
10.10.80.1
255.255.255.0
Ping
192.168.100.1
external
65.39.139.53
65.39.139.63
admin
(none)
0.0.0.0
0.0.0.0
65.39.139.53
65.39.139.63
HTTPS, Ping
HTTPS, Ping
HTTPS, Ping
Ping
Ping
Ping
Ping
25