Page Button And Presentation Modes - Honeywell Xenon Series User Manual

Page Button and Presentation Modes

When in Streaming Presentation Mode, the scanner's aimer goes out after a short
time, but the scan illumination remains on all the time to continuously search for
bar codes (see
Streaming Presentation Mode, pressing the page button on the base puts the
scanner into Streaming Presentation Mode until the timeout occurs. If a bar code is
scanned before the timeout is reached, the timer starts over.
When the scanner is in the base, press the page button once to put the scanner
into Temporary Streaming Presentation Mode. When the scanner is in the base and
the base has external power (plugged into an outlet), press the page button twice
to put the scanner into Streaming Presentation Mode. Press it twice again to end
Streaming Presentation Mode. When the base does not have external power, press-
ing the page button twice does not trigger Streaming Presentation Mode.
When the scanner is out of the base, the page button works normally. Default =
Temporary Streaming Presentation Mode On.
To remove Temporary Streaming Presentation Mode, scan the bar code for
Mode On
48
Streaming Presentation™ Mode
* Temporary Streaming Presentation Mode
on page 54.
on page 127). When in Temporary
On
Xenon/Granit User Guide
* Page