Table of Contents
Advertisement
The unit defaults to a USB PC Keyboard. Refer to
settings.
For additional USB programming and technical information, refer to "USB Applica-
tion Note," available at
Connect with Keyboard Wedge
A scanner or cordless base can be connected between the keyboard and PC as a
"keyboard wedge," where the scanner provides data output that is similar to key-
board entries.
Note: The Granit 1980i does not support the keyboard wedge interface.
The following is an example of a keyboard wedge connection:
1. Turn off power and disconnect the keyboard cable from the back of the termi-
2. Connect the appropriate interface cable to the device and to the terminal/
4
nal/computer.
computer.
Corded Xenon Scanner Keyboard Wedge Connection:
www.honeywellaidc.com.
page 20
for other USB terminal
Xenon/Granit User Guide
Advertisement
Table of Contents
