Bluetooth Hid Keyboard Connect - Honeywell Xenon Series User Manual

sion 2.1 or higher. When SSP is on, no PIN is required for pairing. Turn SSP off if
you are connecting to a Bluetooth device that is not using a compatible Bluetooth
version. Default = Bluetooth SSP On.
Note: SSP is only supported by the Granit 1981i scanner.

Bluetooth HID Keyboard Connect

Your scanner can be paired with Bluetooth-capable devices, such as personal com-
puters, laptops, and tablets, so that scanned data appears on your device screen as
though it was entered on the keyboard. In order to pair with the Bluetooth device:
1. Scan the appropriate Bluetooth HID Keyboard Connect bar code below.
2. Set your personal computer, laptop or tablet so it searches for other Bluetooth
3. Select the scanner name on your device. Some devices will automatically pair
4. If your device does not automatically pair with the scanner, a PIN is displayed.
72
* Bluetooth SSP On
Bluetooth HID Keyboard
Connect
devices. (Refer to your device's User Guide for pairing instructions.)
with the scanner. If your device pairs automatically with the scanner, it displays
a successful pairing message and you do not need to continue to the next step.
This PIN must be scanned within 60 seconds. Quickly scan Bluetooth PIN
Code below, then scan the numeric bar code(s) for the PIN code from the chart
below, then scan Save.
Bluetooth PIN Code
Bluetooth SSP Off
Bluetooth HID Japanese
Keyboard Connect
Xenon/Granit User Guide