Change The Scanner's Bluetooth Pin Code; Minimize Bluetooth/Ism Band Network Activity - Honeywell Xenon Series User Manual

You may also scan the Scanner Name bar code below and scan a number for the
scanner name. For example, if you wanted to name the linked scanner "312," you
would scan the bar code below, scan the 3, 1, and 2 bar codes on the
Chart,
scanner to relink to the base.

Change the Scanner's Bluetooth PIN Code

Some devices require a PIN code as part of the Bluetooth security features. Your
scanner's default PIN is 1234, which you may need to enter the first time you con-
nect to your PC. The PIN code must be between 1 and 16 characters. To change the
PIN, scan the bar code below and then scan the appropriate numeric bar codes
from the

Minimize Bluetooth/ISM Band Network Activity

The settings described below can help you customize the relinking behavior of the
cordless area-imaging system to obtain the best compromise between conve-
nience and low interference.
Note: ISM band refers to the 2.4 to 2.48 GHz frequency band used by wireless networks,
cordless phones, and Bluetooth.
Xenon/Granit User Guide
0007
beginning on page 353, then Save. Scan the Reset bar code and wait for the
Programming Chart,
Scanner Name
beginning on page 353, then Save.
Bluetooth PIN
0006
Reset
Programming
107