Cisco Nexus 9504 Hardware Installation Manual page 13

Overview
The following figure shows the hardware features seen from the rear of the chassis (one fan tray has been
removed to show the fabric modules behind the fan trays).
Figure 2: Hardware Features on the Rear of the Chassis
1 Fan trays (three—one not shown in order to
display the fabric modules located behind the fan
trays) in slots slots FAN 1 to FAN 3 (identified
in CLI output as Modules 41 to 43)
2 Fabric modules (up to six—up to two behind each
fan tray) in slots FM 1 to FM 6 (identified in CLI
output as Modules 21 to 26)
3 System controllers (two) in slots SC 1 and SC 2
(identified in CLI output as Modules 29 and 30)
4 Grounding pad
5 Chassis handles (used only for positioning the
chassis on the bottom support rails—do not use
these handles for lifting the filled chassis)
Cisco Nexus 9504 NX-OS Mode Switch Hardware Installation Guide
Overview
3