Removing a Fabric Module
a) Unscrew the screw on the center of each of the two handles on the fabric module (see Callout 1 in the following
figure).
Figure 16: Unlocking a Fabric Module from its Slot in the Chassis
1
Unscrew two captive screws (one on each ejector
handle).
b) Rotate the two handles at least 30 degrees so that the other end of each handle no longer holds the module in the slot
(see Callout 2 in the previous figure).
Cisco Nexus 9504 NX-OS Mode Switch Hardware Installation Guide
74
Replacing or Installing Modules, Fan Trays, and Power Supplies
2
Rotate both ejector handles away from the front of
the fabric module.