Cisco Nexus 9504 Hardware Installation Manual page 33

Installing a Chassis
Step 2
Insert the stripped end of the grounding wire into the open end of the grounding lug, and use a crimping tool to crimp
the lug to the wire (see Callout 2 in the following figure). Verify that the ground wire is securely attached to the grounding
lug by attempting to pull the wire out of the crimped lug.
Figure 7: Grounding a Cisco Nexus 9504 Chassis
1 Chassis grounding pad
2 Grounding cable, with 0.75 in. (19 mm) of insulation
stripped from one end, inserted into the grounding lug
and crimped in place
3 Two M4 screws used to secure the grounding lug to
the chassis
Cisco Nexus 9504 NX-OS Mode Switch Hardware Installation Guide
Grounding the Chassis
23