Cisco Nexus 9504 Hardware Installation Manual page 53

Managing the Switch
I/O Module State
failure
ok
power-denied
active
HA-standby
standby
Use the show module [slot_number] command to display information about all of the installed modules or
for the module that you specify by its slot number.
This example shows how to display information about all the modules installed in a chassis.
switch# show module
Mod Ports
--- -----
4 36
22 0
24 0
26 0
27 0
28 0
29 0
30 0
Mod Power-Status
--- ------------
24 powered-dn
26 powered-dn
Mod Sw
--- --------------
4 6.1(4.11)
22 6.1(4.11)
27 6.1(4.11)
28 6.1(4.11)
29 6.1(4.11)
30 6.1(4.11)
Mod MAC-Address(es)
--- --------------------------------------
4 00-22-bd-f8-2a-83 to 00-22-bd-f8-2a-b6
22 00-00-00-00-00-00 to 00-00-00-00-00-00
24 00-00-00-00-00-00 to 00-00-00-00-00-00
26 00-00-00-00-00-00 to 00-00-00-00-00-00
27 00-22-bd-f6-9d-58 to 00-22-bd-f6-9d-69
28 00-22-bd-fc-04-b0 to 00-22-bd-fc-04-c1
29 00-00-00-00-00-00 to 00-00-00-00-00-00
30 00-00-00-00-00-00 to 00-00-00-00-00-00
* this terminal session
switch#
Description
The switch detects a module failure upon initialization and automatically attempts to
power-cycle the module three times. After the third attempt, the module powers down.
The switch is ready to be configured.
The switch detects insufficient power for an I/O module to power up.
This module is the active supervisor or system controller module and the switch is
ready to be configured.
The HA switchover mechanism is enabled on the standby supervisor module.
The switchover mechanism is enabled on the standby system controller module.
Module-Type
----------------------------------- ------------------ ----------
36p 40G Ethernet Module
Fabric Module
Fabric Module
Fabric Module
Supervisor Module
Supervisor Module
System Controller
System Controller
Reason
---------------------------
Configured Power down
Configured Power down
Hw
------
0.1010
0.1010
0.3011
1.0
0.2010
0.2010
Cisco Nexus 9504 NX-OS Mode Switch Hardware Installation Guide
Displaying the Current State of a Module
Model Status
N9k-X9636PQ ok
N9K-C9504-FM ok
N9K-C9504-FM powered-dn
N9K-C9504-FM powered-dn
N9K-SUP-A active *
N9K-SUP-A ha-standby
N9K-SC-A active
N9K-SC-A standby
Serial-Num
----------
SAL17257AHD
SAL17194HVX
SAL17194HRK
SAL17194HSR
SAL17184072
SAL1739DAUL
SAL17225YFS
SAL17225YG8
43