Pausing And Canceling Output; Cutting Off The Media - Roland VersaArt RE-640 User Manual

Outputting

Pausing and Canceling Output

You can pause and cancel printing before it finishes. We do not recommend resuming printing because hori-
zontal stripes are produced at the place where output stopped.
Procedure

Press
2
This pauses printing operation.
Press
To cancel the output, go the next Procedure without pressing

TO CANCEL, HOLD
DOWN PAUSE KEY

Stop sending the output data from the computer.

Cutting Off the Media

Procedure

Close the front cover.

Make sure

Press

FUNCTION
SHEET CUT
REMOVE
MEDIA CLAMPS
54
before output finishes.
again to resume printing.
When the screen shown in the figure appears, hold down
for one second or longer.
This cancels printing operation.
lights up.
.
Press
Press
When the media clamps are attached, the screen shown in the figure ap-
pears. Open the front cover and detach the left and right media clamps.
.
to display the left figure.
.